Put the nopttimeout script in your /home/irlp/custom/ directory and make sure it's set executable (do, 'chmod 750 /home/irlp/custom/nopttimeout' at the command prompt).  There are several user configurable settings at the top of the script which allow you to adjust the timing and method to suit your needs.  nopttimeout has the ability to dynamically block and unblock the inbound packets that carry the audio payload by manipulating the kernel's packet filtering tables.  By handling it at the packet level, it becomes transparent to the IRLP software, and is treated exactly the same as a genuine break in received audio (thus resetting the ptt lock detect timer).  Because the manipulation of the kernel's packet filtering tables requires privileged access, you will need to add the following line to your /etc/sudoers file via the, "visudo" command:

  repeater ALL= NOPASSWD: /sbin/iptables

Although not the recommended way, nopttimeout can also be configured to manipulate ispeaker and sfswrapper in order to accomplish the break in incoming audio.  This causes the ispeaker binary to be killed off and then restarted each and every time the break interval is reached.  It's not as seamless, but it works.  If this method is used, there is no need to modify your /etc/sudoers file as mentioned above.  After configuring nopttimeout to your liking, it can be run right from the command line or called from another script (like /home/irlp/custom/custom_decode).

To be able to activate and deactivate it from a DTMF command sequence, simply place the following code into your /home/irlp/custom/custom_decode file:

# starts the nopttimeout timer
if [ "$1" = "SP1" ]; then
   if [ -f "$LOCAL/active" ]; then
      killall ispeaker > /dev/null 2>&1
   fi
   $BIN/key
   sleep 1
   play $AUDIO/1.wav
   $BIN/unkey
   if [ -f "$LOCAL/active" ]; then
      $SCRIPT/sfswrapper > /dev/null 2>&1
   fi
   $CUSTOM/nopttimeout & > /dev/null 2>&1
   exit 1
fi
# stops the nopttimeout timer
if [ "$1" = "SP0" ]; then
   if [ -f "$LOCAL/active" ]; then
      killall ispeaker > /dev/null 2>&1
   fi
   $BIN/key
   sleep 1
   play $AUDIO/0.wav
   $BIN/unkey
   if [ -f "$LOCAL/active" ]; then
      $SCRIPT/sfswrapper > /dev/null 2>&1
   fi
   if [ -f /tmp/nopttimeout.lock ]; then
      touch $LOCAL/.nopttimeout
   fi
   exit 1
fi

That would cause the DTMF sequence, "*#1" (star-pound-one) to activate, and, "*#0" (star-pound-zero) to deactivate nopttimeout.  As can be seen, the nopttimeout script can easily be stopped by creating a, 'flag' file in /home/irlp/local/ called, '.nopttimeout' (don't overlook the dot at the beginning).  When nopttimeout encounters this file, it immediately removes it and then exits.  This makes it very easy to background the nopttimeout script and still be able to signal it.  Enjoy!